How Do You Reset the Door Code On a Ford F150?

The door code system in Ford F-Series is a cool feature to secure the vehicle. If you lose your keys or lock the keys inside the vehicle, this feature is the best option for you. It provides you with a keyless entry numeric keypad on the door of the driver’s side. Through this keypad, you can enter the personal code and lock and unlock your vehicle without using the key.

How do you reset the door code on a Ford F150? To reset the door code of Ford F 150, enter the factory code then within five seconds, press ½ button. Now, enter the new five-digit code within five seconds of each one. To save the new code, press the ½ button.

How Do You Reset the Door Code On a Ford F150
How Do You Reset the Door Code On a Ford F150?

The door code on a Ford F150 restricts the unknown person to enter by opening the door of your vehicle and running away. However, this keypad can be useless and create trouble for you if you are out of the vehicle and forget the code.

But there is nothing to worry about. You don’t need to call any mechanic who comes to solve your problem.  By following the above steps, you can reset the code on a Ford F 150 and save time and money.

How do You Reset the Door Code on a Ford F150?

By following the below steps, you can reset the door code of your Ford F 150:

  • Locate security code

To reset the door code, first, you have to access the original security code. You can find it by scanning the wallet card of the owner (that is commonly put in the glove compartment) or the owner’s manual. It is a five-digit code that comes with the vehicle and is unique to your Ford.

  • Locate the keypad code

The keypad code is behind the dash and above the radio on the passenger side of the front seat. In some Ford F models, it is behind the interior panel. You have to remove the interior panels and the kick plate. There is a black box on which you can see the five-digit code on a white sticker. A flashlight will help you to see the code accurately.

  • Dial in the keypad

After accessing the keypad code, now you have to do the following steps within five seconds of each step.

  1. Press ½ key.
  2. Enter the new chosen code. Here, you have to be careful while entering the code. You have to enter each number in just 5 seconds of the previous one.
  3. For the first driver, press ½ to store your settings.
  4. For the second driver press ¾.
  5. Wait a little bit until your new code is accepted and the door is enabled to lock and unlock.
  6. Your new code will be successfully entered and programmed and you will save yourself from any trouble.

Programming your personal entry code

The personal code of your vehicle is not replaced by the factory code. To unlock the vehicle, you can use either code. Each time, when you will set a new code, the module erases the previous code and sets the new one. The factory-set code is not erased.

Erasing the personal code or previous owner’s code

Sometimes, you purchase a used Ford F and don’t receive the entry code. To erase the personal code or previous owner’s code, you can follow these steps:

  1. Enter the factory code.
  2. After step one, press the ½ button within five seconds.
  3. After step two, pressand 9/0 simultaneously within five seconds.
  4. Now the system will only work on the factory-set code.

Unlocking the doors

To unlock the door, you have to enter the personal code or the factory-set code by keeping in mind the five-second time. The light illuminates as you press the first digit.

If you want all the doors unlocked, enter the personal code of the factory-set code. Then press the ¾ button within five seconds.

Locking the doors

If you want to lock the door, press ⅞ and 9/0 buttons at the same time. To lock the door, you don’t need any five-digit code.

Activating or deactivating auto-lock

To activate or deactivate the auto-lock, follow these below steps:

  1. Enter the five-digit code.
  2. Press and keep holding the ⅞ button.
  3. While holding the ⅞ button, press the ¾ button.
  4. Release the ⅞ button.
  5. If the auto-lock is activated, the horn will beep twice. If the auto-lock is deactivated, it will beep once.


In a nutshell, we can say that the Door Code system on a Ford F 150 is a wonderful and fantastic feature. You can secure your vehicle through this system. But in case of forgetting the personal code, you can reset it by using the factory default code. Just press the certain buttons on the numeric keypad and make your vehicle locked and unlocked. You will not need any mechanics for this service.

Read also:

Does Ford F150 Have Heads Up Display?

Can you add navigation to ford F150?